Protech Zoom 400 Instructions d'exploitation Page 35
- Page / 195
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Setting the Area of Use / Setting the Date/Time of the Internal Clock
35
Chapter 2 Preparations
When using the camcorder for the first
time
You cannot use the camcorder without setting the
area of use.
To set the area of use
1 Set the POWER switch to the ON
position.
The screen for setting the area of use appears
in the viewfinder.
2 Press the MENU knob.
The settings for selectable areas of use are
displayed.
3 Turn the MENU knob to select the
desired area of use.
a) The composite signal output from this camcorder
is an NTSC signal with a black setup (7.5 IRE).
The system frequency is 59.94i.
b) The composite signal output from this camcorder
is an NTSC signal with no black setup. The
system frequency is 59.94i.
c) The composite signal output from this camcorder
is a PAL signal. The system frequency is 50i.
4 Set the following items.
• Time Zone
• Date/Time
See “Basic Setup Menu Operations”
(page 104).
5 Turn the MENU knob to select
“Finish”, then press the MENU knob.
The camcorder is now ready for use.
You can set or change the date and time of the
internal clock. The date and time set are reflected
in the timecode.
For menu operations, see “Basic Setup Menu
Operations” (page 104).
1 Select “MAINTENANCE” > “Clock
Set” > “Date/Time” in the setup menu.
2 Press the MENU knob.
The Date/Time setting window appears.
3 Turn the MENU knob to display the
desired value, and press the knob.
The selection shifts to the next item on the
right.
4 To continue the remaining settings,
repeat step 3.
5 Making sure that “SET” is selected,
press the MENU knob.
The internal clock is set with the date and
time set in steps 3 and 4.
To cancel the setting
Before executing step 5, push the MENU
CANCEL/PRST/ESCAPE switch up to the
CANCEL/PRST side.
Setting the Area of Use
Setting Area of use
NTSC Area NTSC area (for areas other
than Japan)
a)
NTSC(J) Area
NTSC area (Japan)
b)
PAL Area
PAL area
c)
Setting the Date/Time of
the Internal Clock
- Solid-State Memory 1
- Camcorder 1
- Table of Contents 2
- Chapter 4 : Shooting 4
- Chapter 5 : Clip Operations 5
- Chapter 9 : Maintenance 6
- Foreword 8
- 1 Overview 9
- Features 10
- Chapter 1 Overview 10
- Locations and Functions 11
- Accessory Attachments 12
- Right side (near the front) 14
- Right side (near the rear) 16
- Left side and upper section 19
- Monochrome LCD Panel 21
- Viewfinder 24
- Viewfinder Screen 25
- White” setting (see 26
- White” is greater than 26
- Bottom of viewfinder screen 27
- 2 Preparations 29
- Attaching the Viewfinder 30
- Chapter 2 Preparations 31
- Using the BKW-401 Viewfinder 33
- Rotation Bracket 33
- Setting the Area of Use 35
- Setting the Date/Time of 35
- Mounting and Adjusting 36
- Carrying out the adjustment 37
- Preparing the Audio 38
- Input System 38
- AUDIO IN Connectors 39
- Tripod Mounting 41
- Connecting a Video 41
- Using the Shoulder 42
- Adjusting the Shoulder 42
- Pad Position 42
- 3 Adjustments and Settings 43
- In FAT mode 44
- Adjusting the Black 45
- Balance and the White 45
- Adjusting the White Balance 46
- 2 and 3 as required 47
- 3 Repeat step 2 as required 48
- Shutter Speed 49
- Changing the Reference 50
- Value for Automatic Iris 50
- Adjustment 50
- Switching between Zoom Modes 51
- Using Manual Zoom 51
- Using Servo Zoom 51
- Adjusting the Focus 52
- Adjusting the Audio 53
- Setting the Time Data 54
- Setting the User Bits 55
- Synchronizing the Timecode 55
- 1 Turn on the POWER switch 56
- 2 Set the PRESET/REGEN/CLOCK 56
- Checking Camcorder 57
- Settings and Status 57
- Information (Status 57
- Screens) 57
- 3 Close the cover 58
- Restoring SxS Memory Cards 60
- Using a Media Adaptor 61
- Operating via the 62
- REMOTE Connector 62
- Operating the Menu from the 64
- Using a Wi-Fi Adapter 76
- Using the Web Menu 78
- Using Live Logging Functions 79
- Using the Wi-Fi Remote 79
- Commander 79
- Basic Operations 80
- Advanced Operations 83
- Recording Time-lapse Video 84
- (Interval Rec Function) 84
- (Frame Rec Function) 85
- Chapter 4 Shooting 86
- Mix Function 87
- Planning Metadata 88
- 5 Clip Operations 91
- Playing Clips 92
- Using Thumbnails to Search 93
- Inside Clips 93
- Thumbnail Operations 95
- Basic THUMBNAIL Menu 97
- Displaying Clip Properties 98
- Adding/Deleting the OK Mark 99
- (FAT-HD Mode Only) 99
- Copying Clips 99
- Deleting Clips 100
- Screen (UDF and FAT-HD Mode 100
- S1 S2 S2 S1 101
- To add shot marks 102
- To delete shot marks 102
- Menu and Detailed Settings 103
- Basic Setup Menu 104
- Operations 104
- Basic Setup Menu Operations 105
- To enter text 106
- To cancel the setting change 106
- To exit the menu 106
- Menu List 107
- Makes settings related 109
- Selects the items to 116
- PAINT Menu 123
- MAINTENANCE Menu 129
- Wi-Fi Remote 142
- “Disable.” 142
- FILE Menu 144
- 4 Press the MENU knob 153
- Loading Setting Data 154
- Contents 154
- Saving and Loading 155
- Scene Files 155
- Lens Files 156
- Saving and Loading Lens Files 157
- Connecting External Devices 158
- HDMI connector 159
- VIDEO OUT connector 159
- SxS PRO 8GB 160
- To remove an SxS memory card 161
- 3 Start recording 162
- 3 Start the recording 163
- Configuring a Shooting 164
- 9 Maintenance 165
- Operation Warnings 166
- Warning Indication 167
- Recording continues 171
- 1) (B) for the card in slot B 172
- Appendix 173
- Important Notes on Operation 174
- Exchanging the Battery 175
- Specifications 179
- Audio Block 180
- Media Block 180
- Inputs/Outputs 180
- Lens Block (PMW-400K Only) 181
- Supplied Accessories 181
- Recommended Additional 181
- Equipment 181
- Dimensions 182
- About i.LINK 185
- MPEG-2 Video Patent 186
- Portfolio License 186
- About Bitmap Fonts 186
- About OpenSSL 187
- About JQuery,Sizzle.js 190
© 2020, manymanuals.fr. Tous droits réservés | 0.415 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels