Protech Zoom 400 Instructions d'exploitation télécharger pdf (Page 93)

Clip Playback

Chapter 5 Clip Operations

To play clips sequentially starting from a

selected clip

1 Select the thumbnail of the clip that you

want to play first.

2 Press the PLAY/PAUSE button.

Play begins from the top of the selected clip.

Play continues through all clips after the selected

clip.

When the last clip has been played to the end, the

camcorder enters pause (still image) mode at the

last frame of the last clip.

Press the THUMBNAIL button to return to the

thumbnail screen.

Playback also stops if you eject the memory card.

In this case, the camera picture appears in the

viewfinder.

Notes

• There may be momentary picture breakup or still

image display at the transition from one clip to another.

During this time, the playback controls and the

THUMBNAIL button cannot be operated.

• When you select a clip in the thumbnail screen and

begin playback, there may be momentary picture

breakup at the top of the clip. To view the top of the

clip without breakup, put the camcorder into playback

mode, pause, use the PREV button to return to the top

of the clip, and start playback again.

• On SxS memory cards that contain both HD-mode and

SD-mode clips, you cannot play all clips in sequence.

For example, while an HD mode thumbnail screen is

displayed, only HD mode clips are played in sequence.

To cue up clips

To play from the top of the first clip

Simultaneously press the PREV and F REV

buttons. This jumps to the top of the first clip on

the SxS memory card.

To play from the top of the last clip

Simultaneously press the NEXT and F FWD

buttons. This jumps to the top of the last clip on

the SxS memory card.

To add a shot mark during play (HD mode

only)

You can add shot marks to clips during play by

using the same method used during recording (see

page 83).

Notes

• Shot marks cannot be recorded when the SxS memory

card is write protected.

• Shot marks cannot be added at the first frame of each

clip or last frame of the last clip.

• Expand thumbnail screen

• Shot mark thumbnail screen (HD mode only)

Like the normal thumbnail screen and the OK clip

thumbnail screen, these screens allow you to

select clip thumbnails (see page 92) and to start

clip playback (see page 93).

To search for scenes in clips with the

expand thumbnail screen

To display the expand thumbnail screen, select a

clip in the thumbnail screen and press the

EXPAND button (see page 17) or select

“THUMBNAIL” > “Thumbnail View” >

“Forward Expansion” in the setup menu. The

selected clip is displayed as follows.

HD mode: The clip is divided into 12 equally-

sized blocks, and a thumbnail of the first

frame in each block is displayed.

SD mode: Only in the case of clips that have been

split into partial files because the file size was

larger than 2 GB, a thumbnail of the first

frame of each partial file is displayed.

See “Displaying the Expand Thumbnail Screen

(UDF and FAT-HD Mode only)” (page 100) for

more information about the expand thumbnail

screen.

Using Thumbnails to Search

Inside Clips

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 194 195

Commentaires sur ces manuels

Pas de commentaire

Protech Zoom 400 Instructions d'exploitation Page 93

Commentaires sur ces manuels