Protech Zoom 400 Instructions d'exploitation télécharger pdf (Page 78)

Using a Wi-Fi Adapter

Chapter 4 Shooting

You can operate the Web menu built in the

camcorder from a computer when it is connected

to the camcorder via a Wi-Fi connection.

You can check the information and setting status

of the camcorder, and upload a planning metadata

file, using the Web menu.

Note

You cannot access the Web menu during recording/

playback. (You cannot send/receive files via a Wi-Fi

connection.)

Example Web menu

Product Information

• Model name

• Serial No.

Network

• MAC Address

• IP Address

• Subnet Mask

Wi-Fi Status

• Wireless Mode

• SSID

• Type

• Channel

• Authentication (network authentication)

• Data Encryption (data encryption)

Planning Metadata

Clicking “Upload” displays the Planning

Metadata screen which allows upload of a

planning metadata file (see page 78).

Note

The configuration of items displayed in the Web menu

varies depending on the browser you are using.

To display the Web menu

1 Launch a web browse on the computer,

and navigate to “http://<camcorder’s

IP address> (setting of

“MAINTENANCE” > “Network

Setting” > “IP Address” in the setup

menu)”.

Example (when the IP address is

“192.168.1.10”):

Type “http://192.168.1.10/” in the address

bar.

If the connection is complete, a dialog

appears asking you to enter the user name

and password.

2 Enter the user name and password, and

click “OK.”

User name: admin

Password: pmw-400 (Lower-case the model

name.)

To upload a planning metadata file

1 Insert a media such as an SxS memory

card.

2 Click “Upload” in the Web menu.

The Planning Metadata screen appears.

3 Click “Select” to show Choose File

dialog.

4 Select the planning metadata file you

want to upload, and then click “Open.”

The path of the selected file appears.

5 Click “Execute.”

The planning metadata file is loaded into the

camcorder’s memory and stored in the

media.

“OK” appears in the Status field when the

transfer is complete.

To upload a planning metadata file

automatically

In the planning metadata file you want to load

automatically, add a “load” property to the

PlanningMetadata tag and set the value of the

property to “True.”

When you display the Web menu and insert a

media, the planning metadata file is immediately

loaded into the camcorder’s memory.

Example: <PlanningMetadata …

sp sp

version="1.00">

For details on the planning metadata, refer to the

Operating Instructions supplied with the camcorder.

Using the Web Menu

load="true"

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 194 195

Commentaires sur ces manuels

Pas de commentaire

Protech Zoom 400 Instructions d'exploitation Page 78

Commentaires sur ces manuels